Does palsa thaw in Northern Finland contribute to remobilisation of metals accumulated in peat?

The dataset contains coordinates of sampling points, field measurements of discharge (Q), physical and chemical parameters of water samples (temperature, specific electric conductivity, pH, oxidation-reduction potential, dissolved oxygen concentration, turbidity and chlorophyll a concentration). It also contains the concentrations of several metals, metalloids and nonmetals, as well as inorganic ions, total organic carbon and total nitrogen, determined in the collected water samples. Stable isotope ratios of oxygen and hydrogen are also included. Sediment sample parameters are also part of the dataset: the concentrations of metals, nonmetals and metalloids, determined with two fraction cutoff points (<0.315 mm & 0.063 mm), and the concentrations of inorganic ions and total organic carbon in the same sediment samples. A dataset connected to the manuscript: Does palsa thaw in Northern Finland contribute to remobilisation of metals accumulated in peat? This dataset has been prepared as part of the PER2Water research grant (PERsistent organic pollutant remobilisation from PERmafrost into surface Waters, PI: Danuta Szumińska).

Dane / Zasoby

Dodatkowe Informacje

Pole Wartość
Nazwa centrum danych -
Autorzy
    • Joanna Jóźwik
    • joanna.jozwik@pg.edu.pl
    • Gdańsk University of Technology
    • Krystyna Kozioł
    • krykozio@ukw.edu.pl
    • Kazimierz Wielki University
    • Marcin Frankowski
    • marcin.frankowski@amu.edu.pl
    • Adam Mickiewicz University in Poznan
    • Marta Jakubiak
    • marta.jakubiak@uwr.edu.pl
    • University of Wrocław
    • Kamil Nowiński
    • kamil.nowinski@ug.edu.pl
    • University of Gdańsk
    • Mariusz Jędrysek
    • mariusz.jedrysek@uwr.edu.pl
    • University of Wrocław
    • Żaneta Polkowska
    • zanpolko@pg.edu.pl
    • Gdańsk University of Technology
    • Danuta Szumińska
    • dszum@ukw.edu.pl
    • Kazimierz Wielki University
Powiązane publikacje
Powiązane projekty
Powiązane zbiory danych
Kategoria ISO
Nazwa kolekcji danych
Sposób pozyskiwania danych
  • In Situ Land-based station
Słowa kluczowe GCMD
  • EARTH SCIENCE > TERRESTRIAL HYDROSPHERE > WATER QUALITY/WATER CHEMISTRY > WATER CHARACTERISTICS
Data początkowa 2022-08-17
Data końcowa 2022-08-25
Nazwa systemu współrzędnych dla zbioru, EPSG
Instrument EXO2 Multiparameter Sonde YSI, electromagnetic current meter Valeport Model 801, muffle furnace + analytical balance, TOC-VCSH/CSN analyser, TOC-L analyzer with TN-L overlay, L2140-i spectrometer, ICP-OES 9820, ICP-MS 2030, Dionex ICS 3000
Opis sprzętu i stanowiska The multiparameter sonde and electromagnetic current meter were used for measurements conducted in the field, on the dates and locations indicated in the dataset. Further equipment was used to determine concentrations in the collected water and sediment samples, following return from the field. Detailed description of the multiparameter sonde sensors used in the field: 1. EXO Optical Dissolved Oxygen Smart Sensor SKU: 599100-01 Optical, luminescence lifetime 0 to 200%: ±1% of reading or 1% saturation, whichever is greater (w.i.g.) 200 to 500%: ±5% of reading 0 to 20 mg/L: ±0.1 mg/L or 1% of reading, w.i.g. 20 to 50 mg/L: ±5% of reading 0 to 50 mg/L measurement range T63<5 sec response time ±0.1 mg/L or 1% of reading accuracy from 0 to 20 mg/L 2. EXO Turbidity Smart Sensor SKU599101-01 Optical, 90° scatter 0 to 4000 FNU, NTU measurement range T63<2 sec response time 0.3 FNU or ±2% of reading accuracy from 0 to 999 FNU 3. EXO Total Algae PC Smart Sensor SKU599102-01 Optical, fluorescence chlorophyll & phycocyanin Range: Phycocyanin: 0 to 100 RFU, 0 to 100 μg/L Chlorophyll: 0 to 100 RFU, 0 to 400 μg/L Chl Resolution: Phycocyanin: 0.01 RFU, 0.01 μg/L Chlorophyll: 0.01 RFU, 0.01 μg/L Chl 4. EXO pH & ORP Smart Sensor SKU577611 pH: Glass combination electrode ORP: Platinum button pH: ±0.1 pH units within 10°C of calibration temperature ±0.2 pH units for entire temperature range ORP: ±20 mV in Redox standard solution 0 to 14 unit measurement range T63<3 sec response time for pH, T63<5 response time for ORP ±0.1 pH unit accuracy within ±10° C of calibration temperature ±20 mV ORP unit accuracy in Redox standard solutions 5. EXO Conductivity & Temperature Smart Sensor SKU599870 Conductivity Units of Measurement: μS/cm, mS/cm Range: 0 to 200 mS/cm Accuracy: 0 to 100 mS/cm: ±0.5% of reading or 0.001 mS/cm, w.i.g. 100 to 200 mS/cm: ±1% of reading Resolution: 0.0001 to 0.01 mS/cm (range dependent) Response Time: T63<2 sec Sensor Type: 4-electrode nickel cell Temperature Units of Measurement: °C, °F, K Range: -5 to 50°C (23 to 122°F) Accuracy: -5 to 35°C: ±0.01°C 35 to 50°C: ±0.05°C Resolution: 0.001°C Response Time: T63<1 sec Sensor Type: Thermistor Specific Conductance Range: 0 to 200 mS/cm Accuracy: ±0.5% of reading or 0.001 mS/cm, w.i.g. Resolution: 0.001, 0.01, 0.1 mS/cm (auto-scaling)
Ograniczenia dostępu Zablokowany
Źródło
DOI zasobu
Wersja zasobu
Data edycji metadanych 2025-07-05
Nazwisko edytora metadanych Paweł Kowalski [wyszukaj w katalogu]
Email edytora metadanych pawel.kowalski@pw.edu.pl
Nazwisko kontaktu centrum danych Krystyna Kozioł
Email kontaktu centrum danych krykozio@ukw.edu.pl